Mukesh Ambani promoted Reliance Industries Limited, Wadhwa Builders, TCG Infrastructure and Hiranandani Constructions have emerged as the leading bidders for the three Bandra-Kurla Complex (BKC) plots in Mumbai measuring 75,350 square metres. The total value of the top bids is Rs 2,790 crore.

Milind Mhaiskar, joint metropolitan commissioner and project director (Mumbai), MUTP, told The Indian Express: “The highest bid per square metre this time is somewhere over Rs 5 lakh, which is easily three times our base price of Rs 1.56 lakh, the amount which was the per square metre bid by Reliance last year when they bagged the convention centre.

In that sense, we are happy with the bids as it reflects a steep upward trend in prices.” According to Mumbai Metropolitan Region Development Authority (MMRDA) Commissioner Ratnakar Gaikwad, MMRDA would lease out its properties for 80 years for the development, operation and maintenance of the commercial complex and car park. “Plots C-70, C-54 and C- 55 (the latter two have been offered as one plot) have been ear­marked for commercial and office use while plot C-66 has been reserved for a multi-storeyed car parking for a minimum of 500 cars along with a commercial complex,” he said.

“This is just the first phase of the bidding process and each bid needs to be analysed before they are awarded. These bids will now go to the executive committee after whose approval it will be announced,” Gaikwad said. “Our target is to raise Rs 2,60,000 crore for the development of the entire MMR region based on our draft plan. The bulk of this will be towards all the mass transit projects that have been earmarked as priority, which will partly come from such bids. MMRDA has another 50 acres of area in such plots.”

MMRDA officials said Reliance Industries emerged as a leading bidder for the C-66 Plot (30,550 sq m) with Rs 918 crore at the rate of Rs 3,00,501 per sq m. The second runner-up is RR Mega City, which had quoted Rs 2,13,093.28 per sq m, and the first runner-up is Business Park Town Planners Limited (BPTP) at Rs 2,48,348 per sq m.

For plot C-70 measuring 16,500 sq m, Wadhwa Group has quoted Rs 5,04,000 per sq m for the total at Rs 831 crore. JSW Property Group is the runner-up by quoting Rs 4,50,000 per sq m. Third bidder is Suzuki Powertrain India Limited (SPIL), who have quoted Rs 4,03,000 per sq m.

For plots C-54-55 with an area of 28,300 sq m, a joint venture between TCG Infrastructure and Hiranandani Constructions quoted a bid of Rs 3,67,992 per sq m totalling Rs 1,041 crore. The second bidder for this plot is SPIL at Rs 3,57,000 per sq m and JSW Property Group at Rs 3.33 lakh per sqm.      

Source: The Indian Express

A consortium lead by ADAG Group company Reliance Energy and Bangalore-based Sobha Developers has succeeded in their bid to build India’s tallest building ever built.

Sources said, APIIC Towers, will be developed on 78 acres of land in Manchervelu on the Express Highway to the upcoming Hyderabad International Airport. Reliance Energy will hold 66% while Sobha Developers will hold 23%. The balance stake of 11% will be held by APIIC (the AP Government’s investment arm).

It is learnt that the first phase of the project will consist of a 100-storey twin tower complex on 30 acres of land. The total project cost is pegged at Rs 6,000 crore. Work on the project will commence next year and is to be completed in three years. The project itself is coining up with certain conditions like milestone achievements.

“In two years, the company has to show signs of progress. If the state government is satisfied with the progress, then land for the second and third (final) phases will be handed over,” sources added.

When TOI contacted ADAG, the spokesperson confirmed winning the bid to construct the towers, but did not divulge any detail on the project or its partners.

The twin towers will have about 4.5 million sq ft of built-up space. The total project will have 11 million sq ft of built-up space. There will be residential complexes, hotels, serviced apartments, and malls to make it an “all under one roof” integrated structure, sources said. The tower is expected to be completed by 2010.

It is learnt that some 23 developers had bid for the project, including Reliance Industries, DLF, Unitech, Mantri Developers, Hiranandani and besides companies from Israel and Malaysia.

The AP Government feels that the proposed twin towers will be the centre piece of all developments in the region.

Source: The Times of India

1) What is runtime analysis? Have you used this?

It’s checks program execution time in microseconds. When you go to se30.if you give desired program name in performance file. It will take you to below screen. You can get how much past is your program.

2) What is meant by performance analysis? Have done
3) How to transfer the objects? Have you transferred any objects?
4) How did you test the developed objects?

I was testing a developed object. There are two types of testing - Negative testing - Positive testing In negative testing we will give negative data in input and we check any errors occurs. In positive testing we will give positive data in input for checking errors.

5) What is the difference between SAP Memory and ABAP Memory?
6) In order to upload Purchase order details, how you handle multiple values for a single field?

Eg: Item field may contain no. of values for a record

7) What is the procedure you followed to upload the data?
How did you handle errors in Call Transaction?

We can create a internal table like ‘bsgmcgcoll’. All the messages will go to internal table. We can get errors in this internal table. Below messages are go to internal table. when you run the call transaction.
- Message type
- Message id
- Message Number
- Variable1
- Variable2
- Variable3

9) Among the Call Transaction and Session Method, which is faster?

Call transaction is faster then session method. But usually we use session method in real time…because we can transfer large amount of data from internal table to database and if any errors in a session. Process will not complete until session get correct.

10) What are the difference between Interactive and Drill Down Reports?

ABAP/4 provides some interactive events on lists such as AT LINE-SELECTION (double click) or AT USER-COMMAND (pressing a button). You can use these events to move through layers of information about individual items in a list.
Drill down report is nothing but interactive report…drilldown means above paragraph only.

11) How to pass the variables to forms?
12) What is the table, which contain the details of all the name of the programs and forms?

Table contains vertical and horizontal lines. We can store the data in table as blocks. We can scroll depends upon your wish. And these all are stored in database (data dictionary).

13.Which contain the details of all the name of the programs and forms? (I don’t know).
14) How did you test the form u developed? How did you taken print?
15) What are Standard Texts?
16) What is the difference between Clustered Tables and Pooled Tables?

A pooled table is used to combine several logical tables in the ABAP/4 dictionary. Pooled tables are logical tables that must be assigned to a table pool when they are defined.
Cluster table are logical tables that must be assigned to a table cluster when they are defined.
Cluster table can be used to store control data they can also used to store temporary data or text such as documentation.

17) What is pf-status?

Pf status is used in interactive report for enhancing the functionality. If we go to se41, we can get menus, items and different function keys, which we are using for secondary list in interactive report.

18) Among “Move” and “Move Corresponding”, which is efficient one?

I guess, ‘move corresponding’ is very efficient then ‘move’ statement. Because usually we use this stamtent for internal table fields only…so if we give move corresponding. Those fields only moving to other place (what ever you want).

19) What are the output type and Tcodes?
20) Where we use Chain and End chain?
21) Do you use select statement in loop end loop, how will be the performance? To improve the performance?

Share This

1. How data is stored in cluster table?

Each field of cluster table behaves as tables which contains the no. of entries.

2. What are client dependant objects in abap/sap?

SAP Script layout, text element, and some DDIC objects.

3. On which even we can validate the input fields in module programs?

In PAI (Write field statement on field you want to validate, if you want to validate group of fields put in chain and End chain statement.)

4. In selection screen I have three fields, plant mat no and material group. If I input plant how do I get the mat no and material group based on plant dynamically?

AT SELECTION-SCREEN ON VALUE-REQUEST FOR MATERIAL. CALL FUNCTION ‘F4IF_INT_TABLE_VALUE_REQUEST’ to get material and material group for the plant.

5. How do you get output from IDOC?

Data in IDOc is stored in segments, the output from Idoc is obtained by reading the data stored in its respective segments.

6. When top of the page event is triggered?

After executing first write statement in start-of-selection event.

7. Can we create field without data element and how?

In SE11 one option is available above the fields strip. Data element/ direct type.

8. How do we debug sapscript?

Go to SE71 give lay set name , go to utilities select debugger mode on.

9. Which transaction code can I used to analyze the performance of ABAP program.

TCode AL21.

10. How can I copy a standard table to make my own z_table.

Go to transaction SE11. Then there is one option to copy table. Press that button. Enter the name of the standard table and in the Target table enter Z table name and press enter.

11. What is the use of ‘outerjoin’

Ans. With the use of outer join you can join the tables even there is no entry in all the tables used in the view. In case of inner join there should be an entry in al the tables use in the view.

12. When to use logical database?

Ans. Advantage of Logical databases: less coding s required to retrieve data compared to normal internal tables. Tables used LDB are in hierarchical structure.

13. What is the use of ‘table index’?

Ans .Index is used for faster access of data base tables.

14. What is the use of ‘FOR ALL ENTRIES’?

Ans. To avoid nested select statements we use SELECT FOR ALL ENTRIES statement. If there r more than 10000 records SELECT FOR ALL ENTRIES is used. Performance wise SELECT FOR ALL ENTRIES is better to use.

15. Can you set up background processing using CALL TRANSACTION?

Yes,Using No Screen Mode.

16. What are table buffers?

Table buffers reside locally on each application server in the system. The data of buffered tables can thus be accessed directly from the buffer of the application server. This avoids the time-consuming process of accessing the database. Buffering is useful if table needs to be accessed more no. of times in a program.

17. How do I set a flag for a field in any table?

Create a char field of length 1. for example field STAS-LKENZ is Deletion Indicator. It means that if the value in the field is ‘X’ then that record has been deleted.

18. Can I execute user exits? If yes, how?

Yes you can. after finding the user exit, you need to use, goto CMOD add ur user-exit to your project. Then activate the FM which you require. Now go into that function module there will be a Include program wit name ZX* . Double click on it, it will ask to create an object, answer it Yes and then write your code in it.

19. How do I find the output type of a table or a program?

Table TNAPR / NAST

Share This

22. What are variables?

Variables are parameters of a query that are set in the parameter query definition and are not filled with values until the queries are inserted into workbooks. There are different types of variables which are used in different application: Characteristics variables, Hierarchies and hierarchy node, Texts, Formulas, Processing types, User entry/Default type, Replacement Path.

23. What is AWB?. What is its purpose?

AWB stands for Administrator WorkBench. AWB is a tool for controlling, monitoring and maintaining all the processes connected with data staging and processing in the business information warehousing.

24. What is the significance of ODS in BIW?

An ODS Object serves to store consolidated and debugged transaction data on a document level (atomic level). It describes a consolidated dataset from one or more InfoSources. This dataset can be analyzed with a BEx Query or InfoSet Query. The data of an ODS Object can be updated with a delta update into InfoCubes and/or other ODS Objects in the same system or across systems. In contrast to multi-dimensional data storage with InfoCubes, the data in ODS Objects is stored in transparent, flat database tables.

25. What are the different types of source system?

SAP R/3 Source Systems, SAP BW, Flat Files and External Systems.

26. What is Extractor?

Extractors is a data retrieval mechanisms in the SAP source system. Which can fill the extract structure of a data source with the data from the SAP source system datasets. The extractor may be able to supply data to more fields than exist in the extract structure.

27.What are internal tables ? How do you get the number of lines in an internal table ? How to use a specific number occurs statement ?

28.How do you take care of performance issues in your ABAP programs ?

29.What are datasets ?

30.How to find the return code of a statement in ABAP programs?

31.What are interface/conversion programs in SAP?

32.Have you used SAP supplied programs to load master data?

33.What are the techniques involved in using SAP supplied programs? Do you prefer to write your own programs to load master data? Why?

34.What are logical databases? What are the advantages/disadvantages of logical databases?

35.What specific statements do you use when writing a drill-down report ?

36.What are different tools to report data in SAP? What all have you used?

37.What are the advantages and disadvantages of ABAP/4 query tools?

38.What are the functional areas ? User groups ? How does ABAP/4 work in relation to these?

39.How do you validate the selection criteria of a report?

40.What are selection texts?

41.What is CTS and what do you know about it ?

42.When a program is created and need to be transported to production, does selection texts always go with it ? if not, how do you make sure ? Can you change the CTS entries ? How do you do it ?

43.What is the client concept in SAP?What is the meaning of client independent?

44.Are programs client dependent?

45.Name a few system global variables you can use in ABAP programs?

Share This

12. Explain open SQL vs native SQL?

ABAP Native SQL allows you to include database-specific SQL statements in an ABAP program. Most ABAP programs containing database-specific SQL statements do not run with different databases. If different databases are involved, use Open SQL. To execute ABAP Native SQL in an ABAP program, use the statement EXEC. Open SQL (Subset of standard SQL statements), allows you to access all database tables available in the R/3 System, regardless of the manufacturer. To avoid conflicts between database tables and to keep ABAP programs independent from the database system used, SAP has generated its own set of SQL statements known as Open SQL.

13. What are datasets?

The sequential files (processed on application server) are called datasets. They are used for file handling in SAP.

14. What are internal tables check table, value table, and transparent table?

Internal table: It is a standard data type object, which exists only during the runtime of the program. Check table: Check table will be at field level checking. Value table: Value table will be at domain level checking ex: scarr table is check table for carrid. Transparent table: - Exists with the same structure both in dictionary as well as in database exactly with the same data and fields.

15. What are the major benefits of reporting with BW over R/3? Would it be sufficient just to Web-enable R/3 Reports?

Performance — Heavy reporting along with regular OLTP transactions can produce a lot of load both on the R/3 and the database (cpu, memory, disks, etc). Just take a look at the load put on your system during a month end, quarter end, or year-end — now imagine that occurring even more frequently. Data analysis — BW uses a Data Warehouse and OLAP concepts for storing and analyzing data, where R/3 was designed for transaction processing. With a lot of work you can get the same analysis out of R/3 but most likely would be easier from a BW.

16. How can an ERP such as SAP help a business owner learn more about how business operates?

In order to use an ERP system, a business person must understand the business processes and how they work together from one functional area to the other. This knowledge gives the student a much deeper understanding of how a business operates. Using SAP as a tool to learn about ERP systems will require that the people understand the business processes and how they integrate.

17. What is the difference between OLAP and Data Mining?

OLAP - On line Analytical processing is a reporting tool configured to understand your database schema ,composition facts and dimensions . By simple point-n-clicking, a user can run any number of canned or user-designed reports without having to know anything of SQL or the schema. Because of that prior configuration, the OLAP engine “builds” and executes the appropriate SQL. Mining is to build the application to specifically look at detailed analyses, often algorithmic; even more often misappropriate called “reporting.

18. What is Extended Star Schema and how did it emerge?

The Star Schema consists of the Dimension Tables and the Fact Table. The Master Data related tables are kept in separate tables, which has reference to the characteristics in the dimension table(s). These separate tables for master data is termed as the Extended Star Schema.

19. Define Meta data, Master data and Transaction data

Meta Data: Data that describes the structure of data or MetaObjects is called Metadata. In other words data about data is known as Meta Data. Master Data: Master data is data that remains unchanged over a long period of time. It contains information that is always needed in the same way. Characteristics can bear master data in BW. With master data you are dealing with attributes, texts or hierarchies. Transaction data: Data relating to the day-to-day transactions is the Transaction data.

20. Name some drawbacks of SAP

Interfaces are huge problem, Determine where master data resides, Expensive, very complex, demands highly trained staff, lengthy implementation time.

21. What is Bex?

Bex stands for Business Explorer. Bex enables end user to locate reports, view reports, analyze information and can execute queries. The queries in workbook can be saved to there respective roles in the Bex browser. Bex has the following components: Bex Browser, Bex analyzer, Bex Map, Bex Web.

Share This

1. What is ERP?

ERP is a package with the techniques and concepts for the integrated management of business as a whole, for effective use of management resources, to improve the efficiency of an enterprise. Initially, ERP was targeted for manufacturing industry mainly for planning and managing core business like production and financial market. As the growth and merits of ERP package ERP software is designed for basic process of a company from manufacturing to small shops with a target of integrating information across the company.

2. Different types of ERP?

SAP, BAAN, JD Edwards, Oracle Financial, Siebel, PeopleSoft. Among all the ERPs most of the companies implemented or trying to implement SAP because of number of advantages aver other ERP packages.

3. What is SAP?

SAP is the name of the company founded in 1972 under the German name (Systems, Applications, and Products in Data Processing) is the leading ERP (Enterprise Resource Planning) software package.

4. Explain the concept of “Business Content” in SAP Business Information Warehouse?

Business Content is a pre-configured set of role and task-relevant information models based on consistent Metadata in the SAP Business Information Warehouse. Business Content provides selected roles within a company with the information they need to carry out their tasks. These information models essentially contain roles, workbooks, queries, InfoSources, InfoCubes, key figures, characteristics, update rules and extractors for SAP R/3, mySAP.com Business Applications and other selected applications.

5. Why do you usually choose to implement SAP?

There are number of technical reasons numbers of companies are planning to implement SAP. It’s highly configurable, highly secure data handling, min data redundancy, max data consistency, you can capitalize on economics of sales like purchasing, tight integration-cross function.

6. Can BW run without a SAP R/3 implementation?

Certainly. You can run BW without R/3 implementation. You can use pre-defined business content in BW using your non-SAP data. Here you simply need to map the transfer structures associated with BW data sources (InfoCubes, ODS tables) to the inbound data files or use 3rd part tool to connect your flat files and other data sources and load data in BW. Several third party ETL products such as Acta, Informatica, DataStage and others will have been certified to load data in BW.

7. What is IDES?

International Demonstration and Education System. A sample application provided for faster learning and implementation.

8. What is WF and its importance?

Business Work Flow: Tool for automatic control and execution of cross-application processes. This involves coordinating the persons involved, the work steps required, the data, which needs to be processed (business objects). The main advantage is reduction in throughput times and the costs involved in managing business processes. Transparency and quality are enhanced by its use.

9. What is SAP R/3?

A third generation set of highly integrated software modules that performs common business function based on multinational leading practice. Takes care of any enterprise however diverse in operation, spread over the world. In R/3 system all the three servers like presentation, application server and database server are located at different system.

10. What are presentation, application and database servers in SAP R/3?

The application layer of an R/3 System is made up of the application servers and the message server. Application programs in an R/3 System are run on application servers. The application servers communicate with the presentation components, the database, and also with each other, using the message server. All the data are stored in a centralized server. This server is called database server.

11. What should be the approach for writing a BDC program?

Convert the legacy system data to a flat file and convert flat file into internal table. Transfer the flat file into sap system called “sap data transfer”. Call transaction(Write the program explicitly) or create sessions (sessions are created and processed ,if success data will transfer).

Share This

60. What is Impact analysis? How to do impact analysis in yr project?

A: — Impact analysis means when we r doing regressing testing at that time we r checking that the bug fixes r working properly, and by fixing these bug other components are working as per their requirements r they got disturbed.

61. HOW TO TEST A WEBSITE BY MANUAL TESTING?

A: — Web Testing
During testing the websites the following scenarios should be considered.
Functionality
Performance
Usability
Server side interface
Client side compatibility
Security

Functionality:
In testing the functionality of the web sites the following should be tested.
Links
Internal links
External links
Mail links
Broken links
Forms
Field validation
Functional chart
Error message for wrong input
Optional and mandatory fields
Database
Testing will be done on the database integrity.
Cookies
Testing will be done on the client system side, on the temporary internet files.

Performance:
Performance testing can be applied to understand the web site’s scalability, or to benchmark the performance in the environment of third party products such as servers and middle ware for potential purchase.

Connection speed:
Tested over various Networks like Dial up, ISDN etc

Load
What is the no. of users per time?
Check for peak loads & how system behaves.
Large amount of data accessed by user.

Stress
Continuous load
Performance of memory, cpu, file handling etc.

Usability :
Usability testing is the process by which the human-computer interaction characteristics of a system are measured, and weaknesses are identified for correction. Usability can be defined as the degree to which a given piece of software assists the person sitting at the keyboard to accomplish a task, as opposed to becoming an additional impediment to such accomplishment. The broad goal of usable systems is often assessed using several

Criteria:
Ease of learning
Navigation
Subjective user satisfaction
General appearance

Server side interface:
In web testing the server side interface should be tested.
This is done by Verify that communication is done properly.
Compatibility of server with software, hardware, network and database should be tested.
The client side compatibility is also tested in various platforms, using various browsers etc.

Security:
The primary reason for testing the security of an web is to identify potential vulnerabilities and subsequently repair them.
The following types of testing are described in this section:
Network Scanning
Vulnerability Scanning
Password Cracking
Log Review
Integrity Checkers
Virus Detection

Performance Testing
Performance testing is a rigorous usability evaluation of a working system under realistic conditions to identify usability problems and to compare measures such as success
rate, task time and user satisfaction with requirements. The goal of performance testing is not to find bugs, but to eliminate bottlenecks and establish a baseline for future regression testing.

To conduct performance testing is to engage in a carefully controlled process of measurement and analysis. Ideally, the software under test is already stable enough so that this process can proceed smoothly. A clearly defined set of expectations is essential for meaningful performance testing.
For example, for a Web application, you need to know at least two things:
expected load in terms of concurrent users or HTTP connections
acceptable response time

Load testing:
Load testing is usually defined as the process of exercising the system under test by feeding it the largest tasks it can operate with. Load testing is sometimes called volume testing, or longevity/endurance testing
Examples of volume testing:
testing a word processor by editing a very large document
testing a printer by sending it a very large job
testing a mail server with thousands of users mailboxes
Examples of longevity/endurance testing:
testing a client-server application by running the client in a loop against the server over an extended period of time

Goals of load testing:
Expose bugs that do not surface in cursory testing, such as memory management bugs, memory leaks, buffer overflows, etc. Ensure that the application meets the performance baseline established during Performance testing. This is done by running regression tests against the application at a specified maximum load.
Although performance testing and load testing can seen similar, their goals are different. On one hand, performance testing uses load testing techniques and tools for measurement and benchmarking purposes and uses various load levels whereas load testing operates at a predefined load level, the highest load that the system can accept while still functioning properly.

Stress testing:
Stress testing is a form of testing that is used to determine the stability of a given system or entity. This is designed to test the software with abnormal situations. Stress testing attempts to find the limits at which the system will fail through abnormal quantity or frequency of inputs.
Stress testing tries to break the system under test by overwhelming its resources or by taking resources away from it (in which case it is sometimes called negative testing).
The main purpose behind this madness is to make sure that the system fails and recovers gracefully — this quality is known as recoverability.
Stress testing does not break the system but instead it allows observing how the system reacts to failure. Stress testing observes for the following.
Does it save its state or does it crash suddenly?
Does it just hang and freeze or does it fail gracefully?
Is it able to recover from the last good state on restart?

Etc.

Compatability Testing
A Testing to ensure compatibility of an application or Web site with different browsers, OS and hardware platforms. Different versions, configurations, display resolutions, and Internet connect speeds all can impact the behavior of the product and introduce costly and embarrassing bugs. We test for compatibility using real test environments. That is testing how will the system performs in the particular software, hardware or network environment. Compatibility testing can be performed manually or can be driven by an automated functional or reg The purpose of compatibility testing is to reveal issues related to the product& interaction session test suite.with other software as well as hardware. The product compatibility is evaluated by first identifying the hardware/software/browser components that the product is designed to support. Then a hardware/software/browser matrix is designed that indicates the configurations on which the product will be tested. Then, with input from the client, a testing script is designed that will be sufficient to evaluate compatibility between the product and the hardware/software/browser matrix. Finally, the script is executed against the matrix,and any anomalies are investigated to determine exactly where the incompatibility lies.
Some typical compatibility tests include testing your application:
On various client hardware configurations
Using different memory sizes and hard drive space
On various Operating Systems
In different network environments
With different printers and peripherals (i.e. zip drives, USBs, etc.)

62. which comes first test strategy or test plan?

A:– Test strategy comes first ans this is the high level document…. and approach for the testing starts from test strategy and then based on this the test lead prepares the
test plan….

63. what is the difference between web based application and client server application as a testers point of view?

A:– According to Tester’s Point of view——
1) Web Base Application (WBA)is a 3 tier application ;Browser,Back end and Server.
Client server Application(CSA) is a 2 tier Application ;Front End ,Back end .
2) In the WBA tester test for the Script error like java script error VB script error etc, that shown at the page. In the CSA tester does not test for any script error.
3) Because in the WBA once changes perform reflect at every machine so tester has less work for test. Whereas in the CSA every time application need to be instal hence ,it maybe possible that some machine has some problem for that Hardware testing as well as software testing is needed.

63. What is the significance of doing Regression testing?

A:– To check for the bug fixes. And this fix should not disturb other functionality

To Ensure the newly added functionality or existing modified functionality or developer fixed bug arises any new bug or affecting any other side effect. this is called regression test and ensure already PASSED TEST CASES would not arise any new bug.

64. What are the diff ways to check a date field in a website?

A:– There are different ways like :–
1) you can check the field width for minimum and maximum.
2) If that field only take the Numeric Value then check it’ll only take Numeric no other type.
3) If it takes the date or time then check for other.
4) Same way like Numeric you can check it for the Character,Alpha Numeric aand all.
5) And the most Important if you click and hit the enter key then some time pag e may give the error of javascript, that is the big fault on the page .
6) Check the field for the Null value ..
ETC…………………

The date field we can check in different ways Possitive testing: first we enter the date in given format

Negative Testing: We enter the date in invalid format suppose if we enter date like 30/02/2006 it should display some error message and also we use to check the numeric or text

Share This

46. High severity, low priority bug?

A: — A page is rarely accessed, or some activity is performed rarely but that thing outputs some important Data incorrectly, or corrupts the data, this will be a bug of H severity L priority

47. If project wants to release in 3months what type of Risk analysis u do in Test plan?

A:– Use risk analysis to determine where testing should be focused. Since it’s rarely possible to test every possible aspect of an application, every possible combination of events, every dependency, or everything that could go wrong, risk analysis is appropriate to most software development projects. This requires judgment skills, common sense, and experience. (If warranted, formal methods are also available.) Considerations can include:

• Which functionality is most important to the project’s intended purpose?
• Which functionality is most visible to the user?
• Which functionality has the largest safety impact?
• Which functionality has the largest financial impact on users?
• Which aspects of the application are most important to the customer?
• Which aspects of the application can be tested early in the development cycle?
• Which parts of the code are most complex, and thus most subject to errors?
• Which parts of the application were developed in rush or panic mode?
• Which aspects of similar/related previous projects caused problems?
• Which aspects of similar/related previous projects had large maintenance expenses?
• Which parts of the requirements and design are unclear or poorly thought out?
• What do the developers think are the highest-risk aspects of the application?
• What kinds of problems would cause the worst publicity?
• What kinds of problems would cause the most customer service complaints?
• What kinds of tests could easily cover multiple functionalities?
• Which tests will have the best high-risk-coverage to time-required ratio

48. Test cases for IE 6.0 ?

A:– Test cases for IE 6.0 i.e Internet Explorer 6.0:—
1)First I go for the Installation side, means that –
+ is it working with all versions of Windows ,Netscape or other softwares in other words we can say that IE must check with all hardware and software parts.
2) Secondly go for the Text Part means that all the Text part appears in frequent and smooth manner.
3) Thirdly go for the Images Part means that all the Images appears in frequent and smooth manner.
4) URL must run in a better way.
5) Suppose Some other language used on it then URL take the Other Characters, Other than Normal Characters.
6)Is it working with Cookies frequently or not.
7) Is it Concerning with different script like JScript and VBScript.
HTML Code work on that or not.
9) Troubleshooting works or not.
10) All the Tool bars are work with it or not.
11) If Page has Some Links, than how much is the Max and Min Limit for that.
12) Test for Installing Internet Explorer 6 with Norton Protected Recycle Bin enabled .
13) Is it working with the Uninstallation Process.
14) Last but not the least test for the Security System for the IE 6.0

49. Where you involve in testing life cycle ,what type of test you perform ?

A:– Generally test engineers involved from entire test life cycle i.e, test plan, test case preparation, execution, reporting. Generally system testing, regression testing, adhoc testing
etc.

50. what is Testing environment in your company ,means hwo testing process start ?

A:– testing process is going as follows
quality assurance unit
quality assurance manager
testlead
test engineer

51. who prepares the use cases?

A:– In Any company except the small company Business analyst prepares the use cases
But in small company Business analyst prepares along with team lead

52. What methodologies have you used to develop test cases?

A:– generally test engineers uses 4 types of methodologies
1. Boundary value analysis
2.Equivalence partition
3.Error guessing
4.cause effect graphing

53. Why we call it as a regression test nor retest?

A:– If we test whether defect is closed or not i.e Retesting But here we are checking the impact also regression means repeated times

54. Is automated testing better than manual testing. If so, why?

A:– Automated testing and manual testing have advantages as well as disadvantages
Advantages: It increase the efficiency of testing process speed in process
reliable
Flexible
disadvantage’s
Tools should have compatibility with our development or deployment tools needs lot of time initially If the requirements are changing continuously Automation is not suitable
Manual: If the requirements are changing continuously Manual is suitable Once the build is stable with manual testing then only we go 4 automation
Disadvantages:
It needs lot of time
We can not do some type of testing manually
E.g Performances

55. what is the exact difference between a product and a project.give an example ?

A:– Project Developed for particular client requirements are defined by client Product developed for market Requirements are defined by company itself by conducting market survey
Example
Project: the shirt which we are interested stitching with tailor as per our specifications is project
Product: Example is “Ready made Shirt” where the particular company will imagine particular measurements they made the product
Mainframes is a product
Product has many mo of versions
but project has fewer versions i.e depends upon change request and enhancements

56. Define Brain Stromming and Cause Effect Graphing? With Eg?

A:– BS:
A learning technique involving open group discussion intended to expand the range of available ideas
OR
A meeting to generate creative ideas. At PEPSI Advertising, daily, weekly and bi-monthly brainstorming sessions are held by various work groups within the firm. Our monthly I-
Power brainstorming meeting is attended by the entire agency staff.
OR
Brainstorming is a highly structured process to help generate ideas. It is based on the principle that you cannot generate and evaluate ideas at the same time. To use brainstorming, you must first gain agreement from the group to try brainstorming for a fixed interval (eg six minutes).

CEG :
A testing technique that aids in selecting, in a systematic way, a high-yield set of test cases that logically relates causes to effects to produce test cases. It has a beneficial side effect in pointing out incompleteness and ambiguities in specifications.

57. Actually by using severity u should know which one u need to solve so what is the need of priority?

A:– I guess severity reflects the seriousness of the bug where as priority refers to which bug should rectify first. of course if the severity is high the same case is with priority in normal.

severity decided by the tester where as priority decided by developers. which one need to solve first knows through priority not with severity. how serious of the bug knows through
severity.

severity is nothing impact of that bug on the application. Priority is nothing but importance to resolve the bug yeah of course by looking severity we can judge but sometimes high severity bug doesn’t have high priority At the same time High priority bug don’t have high severity
So we need both severity and priority

58. What do u do if the bug that u found is not accepted by the developer and he is saying its not reproducible. Note:The developer is in the on site location ?

A:– once again we will check that condition with all reasons. then we will attach screen shots with strong reasons. then we will explain to the project manager and also explain to the client when they contact us

Sometimes bug is not reproducible it is because of different environment suppose development team using other environment and you are using different environment at this situation there is chance of bug not reproducing. At this situation please check the environment in the base line documents that is functional documents if the environment which we r using is correct we will raise it as defect We will take screen shots and sends them with test procedure also

59. what is the difference between three tier and two tier application?

A:– Client server is a 2-tier application. In this, front end or client is connected to
‘Data base server’ through ‘Data Source Name’,front end is the monitoring level.

Web based architecture is a 3-tier application. In this, browser is connected to web server through TCP/IP and web server is connected to Data base server,browser is the monitoring level. In general, Black box testers are concentrating on monitoring level of any type of application.

All the client server applications are 2 tier architectures.
Here in these architecture, all the “Business Logic” is stored in clients and “Data” is stored in Servers. So if user request anything, business logic will b performed at client, and the data is retrieved from Server(DB Server). Here the problem is, if any business logic changes, then we
need to change the logic at each any every client. The best ex: is take a super market, i have branches in the city. At each branch i have clients, so business logic is stored in clients, but the actual data is store in servers.If assume i want to give some discount on some items, so i
need to change the business logic. For this i need to goto each branch and need to change the business logic at each client. This the disadvantage of Client/Server architecture.

So 3-tier architecture came into picture:

Here Business Logic is stored in one Server, and all the clients are dumb terminals. If user requests anything the request first sent to server, the server will bring the data from DB Sever and send it to clients. This is the flow for 3-tier architecture.

Assume for the above. Ex. if i want to give some discount, all my business logic is there in Server. So i need to change at one place, not at each client. This is the main advantage of 3-tier architecture.

Share This

Electronic Arts, one of biggest DON of Gaming world has released a new version of Need for Speed series called PRO STREET. Actually it’s not a sequential to NFS preceding version of Carbon or Most Wanted but a complete new version of street racing. Pro Street is nothing but Professional Street racing. Letting racers like me lol… out of problem pro street is no more illegal like the Most wanted it’s about an opportunity of letting street racers into PROFESSIONAL TRACKS.

Bet you this version of NFS is completely different comparing their old version with real professional tracks, and realistic environment. Other gaming sites report a five star rating for the graphics. IGI reports Pro Street is all about 100 percent about performance and the culture of street racing. Although the complete trinity has never changed i.e becoming the King of Streets by participating in several events including Drift, Drag, Circuit, Speed trap etc. Customization of cars is much deeper in this version which directly allows you to test your cars performance which impacts your car due to their autosculpt technology.

Have a look at the official commercial of Need for Speed pro street below:

EA already shipped Pro street this nov 14 for different gaming platforms like PS3, Xbox 360, PC, PS2, Wii and PSP. It will be available in India during the mid of December, but already the pirated version of PROSTREET for pc is swinging in torrents.

Links: NFS Pro Street | Electronic Arts.

ShareThis